-The Mistral 460 convection reflow soldering system uses re-circulated hot air to accomplish reflow at much lower temperatures than IR systems. Using constant, even heating, a great variety of board sizes will reach reflow temperature with the same heat profile. By eliminating set-up time your production line can work to its fullest capacity. Convection heating provides other advantages over IR. In addition tot the wide process window, it works with: * No shadowing * No colour sensitivity * No belt load sensitivity * No hot spots * No cold solder joints With a belt width of 50 cm (over 19”) and consistent temperature across the entire width the Mistral can easily accommodate your entire production line with speed ups to 1.20 meters/minute. User friendly touch screen with total control. Technical information: * Power requirements: 380VAC-3~ + N * Number of zones: 7 (preheat, 1x reflow and 1x cool down) * Rated power max.: 18,2 kW * Temperature regulation accuracy: ≤1ºC * Conveyor speed: 15 to 120 cm/min. * Max. soldering temp: 300ºC * Max. clearance for assemblies: 25mm. * Max. soldering width: 500mm * Overall length of process chambers: 2400mm * Solder fume extraction pipe: Ø 100mm * Heat up time: 15minutes * Dimensions (LxWxH): 3290x950x1110 mm